Remote control mower for landscaping and grounds maintenance
Steep amenity banks, narrow gaps between planting and fence lines, and turf that a ride-on would mark. The tracked deck carries the weight, the operator walks behind.
Grounds care is priced per visit, so the margin sits in how fast a crew clears a site without leaving marks. A tracked remote control mower changes both numbers: one operator covers the bank, the verge and the strip behind the fence line in a single pass, and the low ground pressure of the tracks means the turf is not rutted where a ride-on would leave a track.
Steep amenity grass and landscaped banks
Embankments, attenuation basins, terraced lawns.
What we quote
| Model | MA-80-SA |
| Rotor | 54 blades |
| Cut height | 3–10 cm |
| Grade | Up to 30° dry |
A landscaped bank is the case where a ride-on either cannot go or should not. The tracked chassis holds the face at 25–30° with the deck following the contour, so the finish reads as a single cut rather than a series of scallops where the deck tipped. Attenuation basins and highway landscaping are the same job at a larger scale.
Ground pressure is the argument that wins the specification. A ride-on concentrates its weight on four wheels and leaves ruts on soft turf after rain; the tracks spread the same mass over a much larger contact area, so a bank that would be closed for a week after a ride-on pass can be cut and walked on the same day.
What to watch
Cut height, not speed. Amenity grass is judged on the finish, so set 4–6 cm and accept a slower pass rather than scalping at 3 cm and forcing a return visit. Where the bank meets a path or a kerb, keep the deck clear of the edge — a spade rotor will take the corner off a kerb.
Parks, estates and grounds
Tree belts, fence lines, strips a ride-on cannot reach.
The 500 mm deck is the reason the MA-50P exists: it passes a gap between a planting bed and a fence that nothing wider will take. On open turf the 800 mm twin-blade deck gives a cleaner finish than a rotor, because two high-speed blades shear the grass rather than mulching it, and the clippings drop evenly instead of clumping.
Match the deck to the finish, not to the site size. A twin-blade deck on amenity turf reads better; a rotor deck handles the rough strip at the boundary in the same visit. Grounds teams that run both report the split as roughly 80% finish work on the twin-blade and 20% rough work on the rotor.
Boundaries and headlands
Boundary strips are where a crew loses time. The machine works the headland while the operator stands outside the bed, so nothing is trampled and no strimmer line is thrown at a window. On estates with a ha-ha or a retaining wall, keep the deck a deck-width back from the edge on the first pass.
Contract mowing and grounds care
Per-visit contracts, multi-site rounds, seasonal peaks.
What we quote
| Model | MA-100-1 |
| Rotor | 66 blades |
| Cut height | 5–15 cm |
| Duty | Sustained |
On a per-visit contract the machine earns by compressing the round. One operator with a tracked mower covers the banks and rough strips that would otherwise need a second crew with brushcutters, so a round that took two vehicles can often be run with one. That is the number that decides whether a contract is worth renewing.
Seasonality is the constraint. In peak growth a 1,000 mm rotor holds the rough work at a sensible pace; in late summer the same deck is faster than the contract needs, and the twin-blade machines take the finish work. Mixed fleets on the same parts bin are the practical answer — blades, filters and belts are common across the range.
Contract economics
Price the round on passes, not on area. A bank that needs two passes costs twice what the same area of flat turf costs, and the deck width is what changes the pass count. Quote from a site walk, not from a satellite measurement.
Cemeteries, schools and sports grounds
Quiet-hours work, confined access, public safety.
What we quote
| Model | MA-80P |
| Rotor | 2 blade |
| Cut height | 3–8 cm |
| Noise | Petrol, check spec |
Sites with the public present change the constraint from output to control. A remote mower keeps the operator visible and the cutting zone empty, which matters where a strimmer would need cones and a spotter. Confined access — a cemetery gate, a school service door — is where the 500 mm deck earns its place.
Check the noise requirement before quoting. Some campuses and memorial grounds specify electric or low-noise equipment for certain hours, and a petrol machine will not meet it. Where the specification allows petrol, the practical rule is to work the outer areas first and the quiet core last, when foot traffic drops.
Working around the public
Keep the discharge away from paths and buildings — a rotor throws material several metres. Stop the deck before anyone walks into the cutting zone, and treat the remote as a control, not as a reason to relax supervision. On school grounds, work outside break times as a rule, not as a courtesy.
Fit at a glance
If your job sits in the left column, the machine will earn its keep. If it sits in the right, buy something else.
| Good fit | Poor fit |
|---|---|
| Banks and embankments with no safe footing | Flat lawns above 1 ha |
| Rows and gaps from 0.9 m wide | Finish cut on ornamental turf |
| Standing brush up to 3 m | Single one-off clearance jobs |
| Operator exposure to traffic or height | Ground with buried irrigation or cable |
| Repeated verges or panel rows | Mature timber above 30 mm stems |
Tell us what you need to cut.
Share the ground, the area and the vegetation. We come back with a model and a landed price within one business day.